• Ethernet Power Over Coaxial and UTP Master/Slave Transceiver 1
  • Ethernet Power Over Coaxial and UTP Master/Slave Transceiver 2

Ethernet Power Over Coaxial and UTP Master/Slave Transceiver

EA-EOC101PTLK
Add to inquiry box
    • Production information
    Ethernet Power Over Coaxial and UTP Master/Slave Transceiver

    EA-EOC101PTLK / EA-EOU101PTLK are designed to extend IP Ethernet transmission and forward the power over coaxial or UTP cable with PoE output to IP camera. EA-EOC101PTLK / EA-EOU101PTLK transmission distance up to 600M / 400M (2000ft /1300ft) depended on supplied power, these transmitter are extremely simple to use. Status LEDs indicate power and link connectivity/activity for RJ45 ports.

     
    Download file


    • No PC required, plug & play and reducing the cables and power distribution cost
    • Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial or UTP cable
    • PoE powered or Inject DC56V power over an existing coaxial or UTP cable to PoE IP camera
    • Up to 600 meter over RG-6, 400 meter over Cat5E transmission distance
    • Built-in 6KV surge protection at BNC and 4KV at RJ45 ports



    OPTIONAL ACCESSORIES

    15-TV119 - BNC Male to 2 BNC Female

    15-BJ101 - BNC to RJ45 Adapter

    15-BT104 - BNC to 2-Wire Adaptor

      

    15-BC104 - BNC 1 to 4 Cable

    MODEL EA-EOC101PTLK EA-EOU101PTLK
    Extender Interface
    Connector Type 1x BNC 1 x BNC with BNC to RJ45
    Adaptor [15-BJ101]
    Cable Type 75-ohm RG59, RG6 cable The Straight through cable
    Cat.5e/Cat.6
    Max. Transmission Distance 600m (2000ft.) RG6 DC56V
    400m (1300ft.) RG6 PoE+    		 600m (2000ft.) CAT5E-CCU DC56V or PoE+ supplied
    Ethernet Interface
    Connector Type 1x RJ-45 with LEDs on Connector
    Cable Type Straight through or cross-over Cat5 Cable, Auto
    MDI/MDIX
    Rate IEEE 802.3x, Auto-Detection for 10/100Base-T
    and full/half duplex
    Input Voltage IEEE 802.3at (PoE+) PD@ RJ45 Port
    Power
    Input Operating Voltage DC 56V / 0.03 – 1.6A @DC JACK
    IEEE 802.3at (PoE+) DC54V / 0.61A
    Power Consumption                               3W
    (w/o power forwarding)
     Yellow LED (On RJ45) Power On
    Green LED (On RJ45) Link/Act.
     
     
     
     
     
    Push Button    		 Reset / Pairing (1) (Join or Leave Network Group(2))
    Push
    Duration    		 LED
    Status    		 Description
    1 – 3 sec Red Blink Join/Host Network
    Group(3)
    5 – 8 sec Amber Blink
    Once -> OFF    		 Leave Network Group(4)
    10 – 15 sec OFF -> Amber
    Blink Once    		 Reset to Default Network
    Group
     
    Mechanical & Environmental
    Weight 176g (6.2 oz)
    Dimensions (W × L × H) 38 x120 x 33mm (1.5”x4.7”x1.3”)
    Operation Temperature -20C ~ +60°C (-4°F ~ 140°F)
    Storage Temperature -30°C ~ 80°C (-22°F ~ 176°F)
    Humidity 20% to 85% RH. (non-condensing)



    OPTIONAL ACCESSORIES

    15-TV119 - BNC Male to 2 BNC Female

    15-BJ101 - BNC to RJ45 Adapter

    15-BT104 - BNC to 2-Wire Adaptor

      

    15-BC104 - BNC 1 to 4 Cable

    EA-EOC101PTLK ETHERNET OVER COAX
    ◆Application Diagram 1: Single Camera EoC with PoE Transmission System
    PoE+ Power Supplied
    ◆Application Diagram 2: Single Camera EoC with PoE Transmission System
    External DC56V Power Supplied
    EA-EOU101PTK ETHERNET OVER UTP
    ◆Application Diagram 1: Single Camera EoU with PoE Transmission System 
    PoE+ Power Supplied
    ◆Application Diagram 2: Single Camera EoC with PoE Transmission System
    External DC56V Power Supplied
    EA-EOU101PT x 2 ETHERNET OVER COAX
    ◆Application Diagram 1: Single Camera EoC without PoE Transmission System
    PoE Power Supplied
    EA-EOU101PT x 2 ETHERNET OVER UTP
    ◆Application Diagram 2: Single Camera EoU without PoE Transmission System
    PoE Power Supplied



    OPTIONAL ACCESSORIES

    15-TV119 - BNC Male to 2 BNC Female

    15-BJ101 - BNC to RJ45 Adapter

    15-BT104 - BNC to 2-Wire Adaptor

      

    15-BC104 - BNC 1 to 4 Cable

    Back to the top