110VAC Power Surge Protector, 40kA
Production information
110VAC Power Surge Protector, 40kA
This product is IEC/ EN 61643-11 certified
This product is IEC/ EN 61643-11 certified
- High energy surge protection
- Built-in flash interrupter device
- Remote alarm interface
- Pluggable replacement module
- Failure detection indicator
- Maximum discharge current of single module is 40KA (8/20 us)
- Standard modular installation
- Reaction rate: ≤25ns
- IEC/EN 61643-11 certified
Model No | 15-SP07M-1 |
SPD port | 1 port |
SPD category | Combination type |
Test category | Class II test |
L-N Uc | 110VAC |
N-PE Uc | 255VAC |
Un | 110VAC |
In(8/20μs) | 20kA |
Imax(8/20μs) | 40kA |
L-N Up | ≤0.9kV |
N-PE Up | ≤1.5kV |
Fuse or circuit breaker/ backup protector |
25A/ 60kA |
L-N tA | ≤25ns |
N-PE tA | ≤25ns |
Size | 36 x 90 x 68mm |
Failure indication | Green : Normal Red : Invalid |
Section area of wires | 4~25mm² |
Installation method | 35mm standard rail (EN50022/ DIN46277-3) |
Installation method | -40°C~85°C |
Sheathing material | Plastic, accord with UL94 V-0 |
Remote alarm | NO/NC contact terminal (Optional) |
Remote signal interface connection capability | The maximum 1.5mm² single stand/cord |
FEATURE
- High energy surge protection
- Built-in flash interrupter device
- Remote alarm interface
- Pluggable replacement module
- Failure detection indicator
- Maximum discharge current of single module is 40KA (8/20 us)
- Standard modular installation
- Reaction rate: ≤25ns
- IEC/EN 61643-11 certified
SPECIFICATION
Model No | 15-SP07M-1 |
SPD port | 1 port |
SPD category | Combination type |
Test category | Class II test |
L-N Uc | 110VAC |
N-PE Uc | 255VAC |
Un | 110VAC |
In(8/20μs) | 20kA |
Imax(8/20μs) | 40kA |
L-N Up | ≤0.9kV |
N-PE Up | ≤1.5kV |
Fuse or circuit breaker/ backup protector |
25A/ 60kA |
L-N tA | ≤25ns |
N-PE tA | ≤25ns |
Size | 36 x 90 x 68mm |
Failure indication | Green : Normal Red : Invalid |
Section area of wires | 4~25mm² |
Installation method | 35mm standard rail (EN50022/ DIN46277-3) |
Installation method | -40°C~85°C |
Sheathing material | Plastic, accord with UL94 V-0 |
Remote alarm | NO/NC contact terminal (Optional) |
Remote signal interface connection capability | The maximum 1.5mm² single stand/cord |
DIMENSION
CONNECTION DIAGRAM
CERTIFICATION