• 24 Ports GE / 2 GE SFP Web Smart PoE Switch 1

24 Ports GE / 2 GE SFP Web Smart PoE Switch

LW-62602GMS-U
Add to inquiry box
Production information
24 Ports GE / 2 GE SFP Web Smart PoE Switch 

LW-62602GMS-U is a Web Smart Managed PoE Switch independently developed by UNIPOE. It provides 24*10/100/1000Mbps RJ45 ports and 2*1000Mbps SFP slots. Each RJ45 port supports MDI/MDIX automatic rollover and wire-speed forwarding. Ports 1-24 have the PoE power supply function and comply with IEEE 802.3af/at standards. They can be used as Ethernet power supply devices to automatically detect and identify compliant power receiving devices and supply power to them through network cables. The storage and forwarding technology and dynamic memory allocation ensure that bandwidth is effectively allocated to each port.
LW-62602GMS-U is easy to use and can flexibly expand home and office networks without limitation of power line layout. It is easy to manage and maintain and meets the requirements of different scenarios.
Download file


  • Supports IEEE 802.3af/at standards;
  • Automatic detection and identification standard PoE power receiving devices, intelligent power supply, does not burn non-standard PoE power receiving devices or common devices
  • Port power supply priority is supported to ensure continuous power supply for key nodes on the network
  • Supports the PD-ALIVE function
  • Supports IEEE802.3x full-duplex flow control and Backpressure half-duplex flow control
  • Supports 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression
  • Supports port traffic statistics, port monitoring, cable detection, and loopback protection
  • Panel indicators monitor working status and assist in fault analysis
  • Intelligent identification of wire speed forwarding
  • Data exchange adopts store-and-forward mode
Model LW-62602GMS-U
Interface 24*10/100/1000Mbps RJ45 Ports
2*1000Mbps SFP Slots
Standard IEEE 802.3,IEEE 802.3u,IEEE 802.3ab,IEEE 802.3z,
IEEE 802.3x,IEEE 802.1x,IEEE 802.1q,
IEEE 802.1p,IEEE802.3af,IEEE802.3at
MAC Address Table 8K
Jumbo Frame 9K Byte
Packet Buffer 4.1M bit
Transfer Mode Store-and-forward
Switching Capacity 52Gbps
Packet Forward Speed 39.69Mpps
PoE Port Port1~24
PoE Port Output Voltage: 55VDC, 30W (Max)
RJ45 PoE Power Supply Mode A: 1/2（+）, 3/6（-）
PoE Power Budget 250W
Power Input 280W
Input Voltage AC 100-240V 50/60Hz
Operating Temperature 0°C ~ 40 °C
Storage Temperature -40 °C ~70°C
Operating Humidity 10% ~ 90% non-condensing
Storage Humidity 5% ~ 90% non-condensing
Dimensions(L*W*H) 440*207*44mm
Fan 2pcs
Surge Protection Differential mode ±2KV ,  Common mode ±4KV 
Electrostatic Standard Contact ±6KV , Air ±8KV
Software Specification
Function menu Functional description
Basic Login authentication and logout　　
Port Pannel (two colors distinguish speed)
1000M green, 100M/10M orange-yellow
System Settings Device Info: Hostname, Device Contact, Device Location
IP Settings: Static, DHCP Client, DNS
Web Settings: Web timeout settings
Telnet Settings: Support telnet enabled, disabled, Support telnet, timeout setting
User Management:Password must contain at least, letters&Number length is not less than 6
Upgrade：Local Upgrade
Device Management: Reboot, Save Configure, Restore
Monitoring Port Statistics　
Cable Diagnostics　
Loop Guard: rlpp
IGMP Snooping: Flood/Drop
Switch Settings Port Settings: Status, Speed/Duplex/Flow Control
Port Mirroring: In/Out/All
Port Isolation　
Jumbo Frame: Support 1522-10000 Bytes
Green Enable　
Static MAC　
Filter MAC　
Search MAC　
MAC List: Classified display static/dynamic, mac address
DHCP Snooping　
VLAN Settings VLAN Member　
VLAN Settings: Access、Trunk
QOS Settings Port Rate　
Storm Control　
QoS Priority Mapping: Support CoS and DSCP priority mapping
QoS Queue Scheduling: Support 8 queue, Support SP, and WRR Queue Scheduling
PoE Settings PoE Basic Settings: Support enabled/disabled PoE port, Force Power PoE Port Limit
PD Alive　
Cloud Settings Cloud Settings: MQTT (Need Function Customization)
Back to the top