• EN 中文
  • About US
  • Products
    • BACK
    • Net/ HD Connection
    • Surge Protection
    • CCTV Security
    • IR Illuminator
    • Solar Energy Series
    • SIP
    • CATALOG
  • Product Video
    • BACK
    • Ethernet over Coaxial
    • PoE Extender
    • CCTV Cameras
    • Surge Protectors
    • IR Illuminator
    • Misc.
  • Support
    • BACK
    • Download
    • FAQ
    • Q&A
    • Warranty
  • News
    • BACK
    • News & Announcement
    • Events
  • Contact US
  • Inquiry Box
  • COP Family
    • BACK
    • COP Korea
    • COP Poland
    • COP UK
  • Languages ( English )
    • BACK
    • English
    • 中文
  • Copyright © 2018 MIRACLE
  • Home
  • Products
  • Net/ HD Connection
  • Ethernet Switch/ Accessories
  • L2+ PoE 10G Switch

Products

  • Ethernet Transmission
    • ETHERNET OVER COAXIAL/ UTP
    • NETWORK KEYBOARD
    • POE EXTENDER
    • POWER OVER ETHERNET
    • ACCESSORIES
  • Network Isolator
  • Ethernet Switch/ Accessories
    • High Power 802.3bt PoE Switch
    • Gigabit Switch
      • Managed
      • Unmanaged
    • PoE Gigabit Switch
    • L2+ PoE Gigabit Switch
    • L2+ PoE 10G Switch
    • L3 PoE Gigabit Managed Switch
    • L3 Giga Managed Switch
    • Industrial Switch
      • Managed
        • Non-PoE
        • PoE
      • Unmanaged
        • PoE
    • Fiber Switch
    • PoE Guarddog Switch
    • Web Smart PoE Switch
    • SFP Module
      • 1.25GB
        • Commercial 1.25GB
        • Industrial 1.25GB
      • 10G
    • Power Supply
  • Ground Loop Isolator
  • Fiber Transmission/ Converter
    • ETHERNET TO FIBER
      • SINGLE MODE
      • MULTI-MODE
    • FIBER-3G-SDI
    • FIBER-HD 5MP
    • RS-485 to FIBER
    • FIBER-ACCESSORIES
    • FIBER-HDMI
    • DRY CONTACT
  • Transmission/ Encoder
    • COAXIAL-HD
    • TWISTED PAIR-AUDIO
    • TWISTED PAIR-CVBS
    • TWISTED PAIR-HD
  • AC/DC Power Supply
    • PoE Switching Adapter
    • AC/DC to DC12V Power
    • AC/AC POWER SUPPLY
    • AC/DC POWER SUPPLY
  • Monitor
    • TEST MONITOR
  • Wireless Product
    • 2.4GHz TRANSCEIVER
    • 2.4GHZ ANTENNA
    • 2.4GHz EXTENSION CABLE
    • 5.8GHz TRANSCEIVER
    • 5.8GHz ANTENNA
    • 5.8GHz EXTENSION CABLE
  • HD-SDI Accessory
  • Converter & Extender
    • DATA CONVERTER
    • HDMI CONVERTER
    • HDMI EXTENDER
  • AMP & Distributor
    • AMPLIFIER
    • HD DISTRIBUTOR
    • RS232 DISTRIBUTOR
    • VIDEO DISTRIBUTOR
    • VGA DISTRIBUTOR
  • Accessories
    • WIRELESS
    • PC INTERFACE
    • AUDIO BOARD
    • CABLE
    • CONNECTOR

52-Port 10G Uplink L2+ Managed Industrial PoE Switch

  • 52-Port 10G Uplink L2+ Managed Industrial PoE Switch 1

52-Port 10G Uplink L2+ Managed Industrial PoE Switch

LW-65204AGMI
Add to inquiry box
Production information
52-Port 10G Uplink L2+ Managed Industrial PoE Switch 

The LW-65204AGM3I is a 10G uplink L2+ managed industrial PoE switch. It has 48*10/100/1000Base-T RJ45 ports and 4*1/10G SFP+ fiber slot ports. Port 1-48 can support IEEE802.3af/at PoE standard. Single-port PoE power up to 30W. As a PoE power supply device, it can automatically detect and recognize power-compliant devices that meet the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, industrial sensor through the network cable, and meet the network environment that needs high-density PoE power supply.
The LW-65204AGMI has L2+ network management function, supports IPV4/IPV6 management, dynamic routing full line-speed forwarding, complete security protection mechanism, perfect ACL/QoS policy, and rich VLAN functions, easy to manage and maintain. With industry-leading ring network technology. It supports a variety of industrial-grade redundant ring network protocols, and each port can form a ring network, supporting chain ring network, starring network, double starring network, ring network, tangent network ring network, intersecting ring network, coupled ring network, self-healing within 20ms of the ring network. The switches series has high reliability, high security, and high manageability, ensures reliable transmission of key data, supports remote management. The Industrial grade series products completely follow the industrial product design and materials. The shell is made of metal material to enhance heat dissipation. It has excellent adaptability to the industrial site environment (including mechanical stability, climate environment adaptability, electromagnetic environment adaptability, etc.). Protection level reaches IP30 and support AC+DC dual redundant power supply.
  • FEATURES
  • SPECIFICATION
  • DIMENSION
Gigabit line-speed access, 10G SFP+ uplink
•  Support non-blocking wire-speed forwarding.
•  Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.
•  Support Gigabit Ethernet port and 10G SFP+ uplink port combination, which enables users to flexibly build networking to meet the needs of various scenarios.

Intelligent PoE power supply

•  IEEE802.3af/at PoE standard, without damaging non-PoE devices.
•  PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
•  Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
•  48x10/100/1000Base-T RJ45 ports can support POE power supply to meet the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios

Security

•  802.1X authentication.
•  Port isolation, Storm control.
•  IP-MAC-VLAN-Port binding.

Strong business processing capability

•  ERPS/STP/RSTP/MSTP.
•  Static and dynamic aggregation.
•  IGMP V1/V2 and IGMP Snooping.
•  IEEE802.1Q VLAN, flexible VLAN division, Voice VLAN and QinQ configuration.
•  QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including Equ, SP, WRR & SP+WRR.
•  ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.

Stable and reliable

•  CE, FCC, RoHS.
•  Low power consumption, galvanized steel casing. The fan active cooling.
•  The user-friendly panel can show the device status through the LED indicator of PWR, Link, PoE.
•  Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.

Easy operation and maintenance management

•  HTTPS, SSLV3, and SSHV1/V2.
•  RMON, system log, LLDP, and port traffic statistics.
•  CPU monitoring, memory monitoring, Ping test, and cable diagnose.
•  Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).
 Model LW-65204AGM3I
Interface Characteristics
Fixed Port 48x 10/100/1000Base-T PoE ports (Data/Power)
4x 1/10G uplink SFP+ ports (Data)
1x Console port (115200, N, 8,1)
Alarm switch port (FAULT)
1x AC100-240V input ports
2x DC48-57V input ports (Support reverse polarity protection
function)
Ethernet Port Port 1-48 support 10/100/1000Base-T auto-sensing, full/half duplex
MDI/MDI-X self-adaption
Optical Fiber Port 1/10G SFP+ optical fiber port
(optional: single-mode / multi-mode, single fiber / dual fiber optical
module. LC)
Chip Parameter
Network
Management Type
L2+
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T,
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3ae
10GBase-SR/LR, IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 598Gbps
Forwarding Rate 131Mpps@64byte
CPU 500MHz
DRAM 4G
FLASH 256M
MAC 32K
Buffer Memory 32M
Jumbo Frame 9.6K
LED Indicator Power: PWR(Yellow), System: SYS(Green),Network: Link/Act (Yellow),
PoE: PoE (Green), Fiber port: L/A (Green)
Reset Switch Yes, press and hold the switch for 10 seconds and release it to restore
the factory settings
PoE & Power
PoE Port Port 1 to 48
PoE Management PoE working status, Delay start of power supply
PoE output priority configuration
Scheduling of PoE operation and time
Total power limit of PoE power supply
PoE output power allocation, on/off & af/at
Power Supply Pin Default:1/2 (+) 3/6 (-)
Max Power Per Port 30W, IEEE802.3af/at
Power Consumption Standby:<35W, Full load:<600W
Power Supply Built-in power supply, AC100~240V 50-60Hz 6.6A
Power Input Port
(Redundancy)
AC power input port x 1set, DC48-57V input port x2set
Alarm switch port
Dual input power port design: AC power supply priority, support
anti-reverse protection, power-off automatic switching DC connection
Physical Parameter
Operation -40~+80°C, 5%~90% RH Non condensing (TEMP / Humidity)
Storage -40~+85°C, 5%~95% RH Non condensing  (TEMP / Humidity)
Dimension (L*W*H) 440*378*44.5mm
Net /Gross Weight <5.5kg / <6.0kg
Installation Desktop,19 inch 1U cabinet installation
Certification & Warranty
Lightning Protection Lightning protection: 6KV 8/20us, Protection level: IP30
IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV
IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV
IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to
3s
IEC61000-4-9(pulsed magnet field):1000A/m
IEC61000-4-10(damped oscillation):30A/m 1MHz
IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV
IEC61000-4-16(common-mode transmission):30V; 300V,1s
FCC Part 15/CISPR22(EN55022):Class B
IEC61000-6-2(Common Industrial Standard)
Mechanical
Properties
I IEC60068-2-6 (anti vibration)
IEC60068-2-27 (anti shock)
IEC60068-2-32 (free fall)
Certification CE, FCC,  RoHS
Network Management Features
Interface IEEE802.3X (Full-duplex)
Port temperature protection setting
No connection port automatic sleep
Port green Ethernet Energy-saving setting
Broadcast storm control based on port speed
SFP+ optical port DDMI real-time digital diagnosis
The speed limit of the message flow in the access port, minimum
particle size is 64Kbps.
Layer 3 Features L2+ Network management
IPV4/IPV6 management
L3 soft routing forwarding,
Static route, Default route @ 128 pcs, APR @ 1024 pcs
VLAN Voice VLAN, QinQ configuration
4K VLAN based on port, IEEE802.1q
Port configuration of Access, Trunk, Hybrid.
VLAN based on MAC, VLAN based on the protocol
Port Aggregation LACP, Static aggregation
Max 26 aggregation groups and 8 ports per group.
Spanning Tree STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
Industrial Ring
Network Protocol
G.8032 (ERPS), Recovery time less than 20ms
250 Ring at most, Max 250 devices per ring.
Multicast MLD Snooping v1/v2,Multicast VLAN
IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out
Port Mirroring Bidirectional data mirroring based on port
QoS
Flow-based Rate Limiting, Packet Filtering
8*Output queues of each port
802.1p/DSCP priority mapping
Diff-Serv QoS,Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR)
ACL Port-based Issuing ACL,ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL
based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
Security
IP-MAC-VLAN-Port binding
ARP inspection,Anti-DoS attack
AAA & RADIUS,MAC learning limit
Mac black holes,IP source protection
IEEE802.1X & MAC address authentication
Broadcast storm control,Backup for host datum
SSH 2.0,SSL,Port isolation,ARP message speed limit
User hierarchical management and password protection
DHCP
DHCP Client,DHCP Snooping, DHCP Server,DHCP Relay
Management CPU instant utilization status view
One-key recovery, Cable Diagnose, LLDP
Console /AUX Modem /Telnet /SSH2.0 CLI
Web Management (HTTPS), NTP, System work log, Ping Test
Download & Management on FTP, TFTP, Xmodem, SFTP ,SNMP
V1/V2C/V3
 


FEATURES
Gigabit line-speed access, 10G SFP+ uplink
•  Support non-blocking wire-speed forwarding.
•  Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.
•  Support Gigabit Ethernet port and 10G SFP+ uplink port combination, which enables users to flexibly build networking to meet the needs of various scenarios.

Intelligent PoE power supply

•  IEEE802.3af/at PoE standard, without damaging non-PoE devices.
•  PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
•  Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
•  48x10/100/1000Base-T RJ45 ports can support POE power supply to meet the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios

Security

•  802.1X authentication.
•  Port isolation, Storm control.
•  IP-MAC-VLAN-Port binding.

Strong business processing capability

•  ERPS/STP/RSTP/MSTP.
•  Static and dynamic aggregation.
•  IGMP V1/V2 and IGMP Snooping.
•  IEEE802.1Q VLAN, flexible VLAN division, Voice VLAN and QinQ configuration.
•  QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including Equ, SP, WRR & SP+WRR.
•  ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.

Stable and reliable

•  CE, FCC, RoHS.
•  Low power consumption, galvanized steel casing. The fan active cooling.
•  The user-friendly panel can show the device status through the LED indicator of PWR, Link, PoE.
•  Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.

Easy operation and maintenance management

•  HTTPS, SSLV3, and SSHV1/V2.
•  RMON, system log, LLDP, and port traffic statistics.
•  CPU monitoring, memory monitoring, Ping test, and cable diagnose.
•  Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).
SPECIFICATION
 Model LW-65204AGM3I
Interface Characteristics
Fixed Port 48x 10/100/1000Base-T PoE ports (Data/Power)
4x 1/10G uplink SFP+ ports (Data)
1x Console port (115200, N, 8,1)
Alarm switch port (FAULT)
1x AC100-240V input ports
2x DC48-57V input ports (Support reverse polarity protection
function)
Ethernet Port Port 1-48 support 10/100/1000Base-T auto-sensing, full/half duplex
MDI/MDI-X self-adaption
Optical Fiber Port 1/10G SFP+ optical fiber port
(optional: single-mode / multi-mode, single fiber / dual fiber optical
module. LC)
Chip Parameter
Network
Management Type
L2+
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T,
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3ae
10GBase-SR/LR, IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 598Gbps
Forwarding Rate 131Mpps@64byte
CPU 500MHz
DRAM 4G
FLASH 256M
MAC 32K
Buffer Memory 32M
Jumbo Frame 9.6K
LED Indicator Power: PWR(Yellow), System: SYS(Green),Network: Link/Act (Yellow),
PoE: PoE (Green), Fiber port: L/A (Green)
Reset Switch Yes, press and hold the switch for 10 seconds and release it to restore
the factory settings
PoE & Power
PoE Port Port 1 to 48
PoE Management PoE working status, Delay start of power supply
PoE output priority configuration
Scheduling of PoE operation and time
Total power limit of PoE power supply
PoE output power allocation, on/off & af/at
Power Supply Pin Default:1/2 (+) 3/6 (-)
Max Power Per Port 30W, IEEE802.3af/at
Power Consumption Standby:<35W, Full load:<600W
Power Supply Built-in power supply, AC100~240V 50-60Hz 6.6A
Power Input Port
(Redundancy)
AC power input port x 1set, DC48-57V input port x2set
Alarm switch port
Dual input power port design: AC power supply priority, support
anti-reverse protection, power-off automatic switching DC connection
Physical Parameter
Operation -40~+80°C, 5%~90% RH Non condensing (TEMP / Humidity)
Storage -40~+85°C, 5%~95% RH Non condensing  (TEMP / Humidity)
Dimension (L*W*H) 440*378*44.5mm
Net /Gross Weight <5.5kg / <6.0kg
Installation Desktop,19 inch 1U cabinet installation
Certification & Warranty
Lightning Protection Lightning protection: 6KV 8/20us, Protection level: IP30
IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV
IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV
IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to
3s
IEC61000-4-9(pulsed magnet field):1000A/m
IEC61000-4-10(damped oscillation):30A/m 1MHz
IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV
IEC61000-4-16(common-mode transmission):30V; 300V,1s
FCC Part 15/CISPR22(EN55022):Class B
IEC61000-6-2(Common Industrial Standard)
Mechanical
Properties
I IEC60068-2-6 (anti vibration)
IEC60068-2-27 (anti shock)
IEC60068-2-32 (free fall)
Certification CE, FCC,  RoHS
Network Management Features
Interface IEEE802.3X (Full-duplex)
Port temperature protection setting
No connection port automatic sleep
Port green Ethernet Energy-saving setting
Broadcast storm control based on port speed
SFP+ optical port DDMI real-time digital diagnosis
The speed limit of the message flow in the access port, minimum
particle size is 64Kbps.
Layer 3 Features L2+ Network management
IPV4/IPV6 management
L3 soft routing forwarding,
Static route, Default route @ 128 pcs, APR @ 1024 pcs
VLAN Voice VLAN, QinQ configuration
4K VLAN based on port, IEEE802.1q
Port configuration of Access, Trunk, Hybrid.
VLAN based on MAC, VLAN based on the protocol
Port Aggregation LACP, Static aggregation
Max 26 aggregation groups and 8 ports per group.
Spanning Tree STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
Industrial Ring
Network Protocol
G.8032 (ERPS), Recovery time less than 20ms
250 Ring at most, Max 250 devices per ring.
Multicast MLD Snooping v1/v2,Multicast VLAN
IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out
Port Mirroring Bidirectional data mirroring based on port
QoS
Flow-based Rate Limiting, Packet Filtering
8*Output queues of each port
802.1p/DSCP priority mapping
Diff-Serv QoS,Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR)
ACL Port-based Issuing ACL,ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL
based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
Security
IP-MAC-VLAN-Port binding
ARP inspection,Anti-DoS attack
AAA & RADIUS,MAC learning limit
Mac black holes,IP source protection
IEEE802.1X & MAC address authentication
Broadcast storm control,Backup for host datum
SSH 2.0,SSL,Port isolation,ARP message speed limit
User hierarchical management and password protection
DHCP
DHCP Client,DHCP Snooping, DHCP Server,DHCP Relay
Management CPU instant utilization status view
One-key recovery, Cable Diagnose, LLDP
Console /AUX Modem /Telnet /SSH2.0 CLI
Web Management (HTTPS), NTP, System work log, Ping Test
Download & Management on FTP, TFTP, Xmodem, SFTP ,SNMP
V1/V2C/V3
 
DIMENSION
Back to the top

CONTACT US

COP SECURITY SYSTEM CORP.

Tel: +886-2-2218-0302
Mobile: +886-907-266135
Fax: +886-2-2218-5785
E-Mail: sales@cop-security.com
Address: 5F., No.5, Lane 130, Mincyuan Rd., Sindian Dist., New Taipei City, Taiwan R.O.C. (23141)

Copyright@COP SECURITY SYSTEM CORP.
All right reserved.
  • Facebook
  • Youtube
  • Twitter
  • Linkedin
  • LINE
  • Google Maps
  • Pinterest
256 bit SSL Encryption
Designed by MIRACLEWeb Design