• 2.4GHz Two Way RS-485 Data and Digital I/O Transceiver Kit 1
  • 2.4GHz Two Way RS-485 Data and Digital I/O Transceiver Kit 2
  • 2.4GHz Two Way RS-485 Data and Digital I/O Transceiver Kit 3

2.4GHz Two Way RS-485 Data and Digital I/O Transceiver Kit

15-2400RSK
Add to inquiry box
    • Production information
    2.4GHz Two Way RS-485 Data and Digital I/O Transceiver Kit


    • 2.4GHz Frequency Hopping Spread Spectrum Module
    • 140mW RF Output
    • Point to point capability
    • Ideal for RS485 wireless Pan/Tilt/Zoom control
    • Omni Directional Dipole Antenna 5dBi
    • Max. 72 Auto Hopping Channels for resisting interferences to other 2.4G devices
    • 750 Meters (light-of-sight)
    Model 15-2400RSK
    Frequency Channels 2400~2480 MHz, 79-CH (CE / FCC)
    RF TX Power 100mW (Average)
    Min. RX Sensitivity -86dBmN/A
    RF Impedance 50Ω Typical
     
    RS485    		 2-wire RS485 Half Duplex
    Baud Rate: 2400/4800/9600 bps
    Fixed Formats:1 Start bit, 1 Stop bit, 8 Data Bits, No Parity
    120 Ohm Termination Resistor ON/OFF Setting
     
    Two Way Digital I/O    		 Digital Input (DI): TTL/CMOS
    Digital Output (DO): NC/COM/NO (Dry Contact) Level Detection (5V TTL)
    Power Consumption 90 mA @ 12VDC
    Operation Temp. -10°C ~ 50°C
    Dimensions 92x75x25mm (WxHxD) (without Antenna)
    Back to the top