Industrial Gigabit Single-Mode Single-Fiber
EA-NF1001-IDAS / BS
Add to inquiry box
Production information
Industrial Gigabit Single-Mode Single-Fiber
The EA-NF1001-IDAS (A-end) and EA-NF1001-IDBS (B-end) are industrial single-port Gigabit Ethernet media converters for single-mode, single-fiber links. They provide an RJ45 UTP port and a fiber interface for roadside equipment and industrial control cabinets.
The EA-NF1001-IDAS (A-end) and EA-NF1001-IDBS (B-end) are industrial single-port Gigabit Ethernet media converters for single-mode, single-fiber links. They provide an RJ45 UTP port and a fiber interface for roadside equipment and industrial control cabinets.
Download file
FEATURES
- Complies with the IEEE 802.3 100Base-TX / FX standard.
- Complies with the IEEE 802.3u 100Base-TX / FX standard.
- Complies with the IEEE 802.3z 1000Base-TX / FX standard.
- The twisted-pair / RJ-45 port supports automatic speed negotiation and full-duplex / half-duplex modes.
- Supports automatic MDI / MDIX and store-and-forward packet switching.
- LED indicators show power, speed, link/activity, fiber-port status and UTP-port status.
- Supports up to 8K MAC addresses.
- Equipped with a standard SC fiber connector, with optional FC / LC / ST connectors.
- Power must be supplied from a 110 / 220 VAC source. If the device cannot accept 110 / 220 VAC input directly, an external power supply must be installed.
- Made in Taiwan.
Protection / EMC / Environmental Tests: IP40 IEC 61000-4-5 Power Port Surge Immunity IEC 61000-4-5 Network Port Surge Immunity IEC 61000-4-2 ESD Immunity IEC 60068-2-32 Free Fall IEC 60068-2-27 Shock IEC 60068-2-6 Vibration CE FCC BSMI
SPECIFICATION
| Interfaces | |
| Ethernet / Fiber Ports |
1 × 10/100/1000Mbps RJ45 UTP port 1 × 1000Mbps fiber port; single-mode, single-fiber, SC (standard) Options: multimode/single-mode; single-fiber/dual-fiber; FC/LC/ST connectors
|
|---|---|
| Power Connector | Terminal block for connection to a power supply output |
| LED Indicators | Power, system operation, fiber-port communication and Ethernet-port communication |
| DIP Switches |
1: Link Fault Pass-through (LFP) / link-fault alarm 2: Flow control — coordinates transmit/receive rates to prevent frame loss caused by rate differences 3: Broadcast-storm suppression — drops traffic and shuts down the port when broadcast traffic exceeds the threshold 4: Fiber-port speed selection (ON=100M, OFF=1000M)
|
| Ethernet Standards |
IEEE 802.3: 10Base-T IEEE 802.3u: 100Base-TX/FX IEEE 802.3z: 1000Base-TX/FX IEEE 802.3i; IEEE 802.3ab: 10/100/1000Base-T IEEE 802.3x: 1000Mbps
|
| Cable Types and Transmission Distance | |
| UTP Cable | 0–100 m (CAT5e, CAT6) |
| Single-Mode Fiber |
A-end: TX 1310 nm / RX 1550 nm; 20 km or more B-end: TX 1550 nm / RX 1310 nm; 20 km or more Standard: SC fiber connector TX 1310 nm optical power: −3 to −9 dBm RX 1550 nm sensitivity: −23 dBm
|
| Electrical | |
| Input Voltage | DC 12–58V; reverse-polarity protection |
| Total Power Consumption | <6W |
| Environment | |
| Operating Temperature | −40°C to +85°C |
| Relative Humidity | 5%–95%, non-condensing |
| Cooling | Fanless design; natural heat dissipation |
| MTBF | 100,000 hours |
| Mechanical | |
| Dimensions | 143 × 104 × 48 mm |
| Mounting | DIN-rail mounting |
| Weight | Approx. 0.45 kg |
| Housing Material | Metal |
| EMC and Ingress Protection | |
| IP Rating | IP40 |
| Power Surge Protection | IEC 61000-4-5 Level X (6kV/6kV), 8/20 μs |
| Ethernet-Port Surge Protection | IEC 61000-4-5 Level 4 (4kV/4kV), 10/700 μs |
| ESD Immunity | IEC 61000-4-2 Level 4 (8kV/15kV) |
| Free Fall | IEC 60068-2-32 |
| Shock | IEC 60068-2-27 |
| Vibration | IEC 60068-2-6 |
| Product Certifications | CE / FCC / RoHS |
| Country of Origin | Taiwan |
CERTIFICATES
CONNECTION DIAGRAM
