Ethernet Power Over Coaxial Master Transceiver (500Mbps) by bt PoE Switch
Ethernet Power Over Coaxial Master Transceiver (500Mbps) by bt PoE Switch
EA-EOC101PB
Add to inquiry box
Production information
Ethernet Power Over Coaxial Master Transceiver (500Mbps) by bt PoE Switch
EA-EOC101PB are designed to extend IP Ethernet transmission and forward the power over coaxial or UTP cable with PoE output to IP camera. EA-EOC101PB transmission distance up to 600M (2000ft) depended on supplied power, these transmitters are extremely simple to use. Status LEDs indicate power and link connectivity/activity for RJ45 ports.
Download file
No PC required, plug & play and reducing the cables and power distribution cost
Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial or UTP cable
PoE powered or Inject DC56V power over an existing coaxial or UTP cable to PoE IP camera.
Coaxial Data Signal Strength Green：GOOD (Link speed > 70 Mbps) Amber：MEDIUM (Link speed 25~70Mbps) Red：BAD (Link speed < 25Mbps) OFF：NO LINK
Yellow LED (On RJ45)
Power On
Green LED (On RJ45)
Link/Act.
Push Button
Reset / Pairing(1) (Join or Leave Network Group(2))
Push Duration
LED Status
Description
1 – 3 sec
Red Blink
Join/Host Network Group (3)
5 – 8 sec
Amber Blink Once -> OFF
Leave Network Group (4)
12 – 15 sec
OFF -> Amber Blink Once
Reset to Default Network Group
Mechanical & Environmental
Weight
100g (3.2 oz)
Dimensions (W × L × H)
42 x109 x 27mm (1.65”x4.29”x1.06”)
Operation Temperature
-20°C ~ +70°C (-4°F ~ 158°F)
Storage Temperature
-40°C ~ 85°C (-40°F ~ 185°F)
Humidity
10% to 85% RH. (non-condensing)
1. All EA-EOC101 factory default is paired to same network group, it can be installed directly, no need pairing again.
2. The transmission system consists of one EA-EOC101x transceiver at NVR side and up to four EA-EOC101 transceivers that connect to IP cameras or other IP device.
3. Use two or more transmission systems at NVR side, and there are crosstalk problems on cables that between different transmissions systems, otherwise no need to do pairing process.
4. To join another network group, must leave current group first, then do the group join.
OPTIONAL ACCESSORIES
15-TV119 - BNC Male to 2 BNC Female
15-BJ101 - BNC to RJ45 Adapter
15-BT104 - BNC to 2-Wire Adaptor
15-BC104 - BNC 1 to 4 Cable
OPTIONAL ACCESSORIES
15-TV119 - BNC Male to 2 BNC Female
15-BJ101 - BNC to RJ45 Adapter
15-BT104 - BNC to 2-Wire Adaptor
15-BC104 - BNC 1 to 4 Cable
◆Application Diagram 1: Single Camera EoC with PoE Transmission System (PoE+ Power Supplied)
◆Application Diagram 2: Single Camera EoC with PoE Transmission System (External DC56V Power Supplied)
◆Application Diagram 3: Star Quadruple Cameras EoC with PoE Transmission System (External 60W~90W PoE Switch Power Supplied)
◆Application Diagram 4: Star Quadruple Cameras EoC with PoE Transmission System (External 60W~90W PoE Switch Power Supplied)
OPTIONAL ACCESSORIES
15-TV119 - BNC Male to 2 BNC Female
15-BJ101 - BNC to RJ45 Adapter
15-BT104 - BNC to 2-Wire Adaptor
15-BC104 - BNC 1 to 4 Cable
FEATURE
No PC required, plug & play and reducing the cables and power distribution cost
Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial or UTP cable
PoE powered or Inject DC56V power over an existing coaxial or UTP cable to PoE IP camera.
Coaxial Data Signal Strength Green：GOOD (Link speed > 70 Mbps) Amber：MEDIUM (Link speed 25~70Mbps) Red：BAD (Link speed < 25Mbps) OFF：NO LINK
Yellow LED (On RJ45)
Power On
Green LED (On RJ45)
Link/Act.
Push Button
Reset / Pairing(1) (Join or Leave Network Group(2))
Push Duration
LED Status
Description
1 – 3 sec
Red Blink
Join/Host Network Group (3)
5 – 8 sec
Amber Blink Once -> OFF
Leave Network Group (4)
12 – 15 sec
OFF -> Amber Blink Once
Reset to Default Network Group
Mechanical & Environmental
Weight
100g (3.2 oz)
Dimensions (W × L × H)
42 x109 x 27mm (1.65”x4.29”x1.06”)
Operation Temperature
-20°C ~ +70°C (-4°F ~ 158°F)
Storage Temperature
-40°C ~ 85°C (-40°F ~ 185°F)
Humidity
10% to 85% RH. (non-condensing)
1. All EA-EOC101 factory default is paired to same network group, it can be installed directly, no need pairing again.
2. The transmission system consists of one EA-EOC101x transceiver at NVR side and up to four EA-EOC101 transceivers that connect to IP cameras or other IP device.
3. Use two or more transmission systems at NVR side, and there are crosstalk problems on cables that between different transmissions systems, otherwise no need to do pairing process.
4. To join another network group, must leave current group first, then do the group join.
OPTIONAL ACCESSORIES
15-TV119 - BNC Male to 2 BNC Female
15-BJ101 - BNC to RJ45 Adapter
15-BT104 - BNC to 2-Wire Adaptor
15-BC104 - BNC 1 to 4 Cable
DIMENSION
OPTIONAL ACCESSORIES
15-TV119 - BNC Male to 2 BNC Female
15-BJ101 - BNC to RJ45 Adapter
15-BT104 - BNC to 2-Wire Adaptor
15-BC104 - BNC 1 to 4 Cable
DIAGRAM
◆Application Diagram 1: Single Camera EoC with PoE Transmission System (PoE+ Power Supplied)
◆Application Diagram 2: Single Camera EoC with PoE Transmission System (External DC56V Power Supplied)
◆Application Diagram 3: Star Quadruple Cameras EoC with PoE Transmission System (External 60W~90W PoE Switch Power Supplied)
◆Application Diagram 4: Star Quadruple Cameras EoC with PoE Transmission System (External 60W~90W PoE Switch Power Supplied)
