Industrial Gigabit PoE Extender (PoE-In / No PoE)
EA-POE101GT
Add to inquiry box
Production information
INDUSTRIAL GIGABIT POE EXTENDER
FEATURE
- IEEE 802.3af/at/bt and other 4-pair high power PoE standard compliant
- Max. 70W PoE power forwarding capability.( EA-POE101G)
- Connecting each of EA-POE101G can extend transmission range for 120m.
- Automatically detects and protects PoE equipment from being damaged by incorrect installation.
- No loss and ultra-low latency and no additional power supply required.
- Support IPV6, 4K MAC address entry and Jumbo packet up to 9000 bytes
- Made for gigabit network devices Dante audio, Wi-Fi AP, SIP speaker, Multi-Function Product.
- Industrial grade working temperature -40°C ~ 75°C
- Industrial grade HBM ESD 6KV and surge protection 6KV (IEC-61000-4-5)
SPECIFICATION
| MODEL | EA-POE101G | EA-POE101GT |
| Ethernet Interface | ||
| Connector Type | 2 x RJ-45 | |
| Cable Type | Straight through or cross-over Cat5 Cable or higher, Auto MDI/MDIX | |
| Rate | IEEE 802.3x, Auto-Detection for 10/100/1000 Base-T and full/half duplex | |
| Indicators (LEDs on the RJ45 connector) | ||
| Yellow LED | 1.0Gbps Network Act./Link | |
| Green LED | 100Mbps Network Act./Link | |
| Yellow and Green LEDs | 10Mbps Network Act./Link | |
| Power | ||
| Power Consumption | 1.75W via PoE | |
| PoE | ||
| Power Forwarding |
Up to 70W depending on standard Max. current 0.75A on data pairs(1-2, 3-6) Max. current 0.75A on data pairs(4-5, 7-8) |
-- |
| Compliant Standard |
IEEE 802.3af/at/bt (including “always-on 48V” and “4-pair”) |
IEEE 802.3af/at/bt Class 2 powered device (No POE forwarding) |
| Mechanical & Environmental | ||
| Mounting | Wall or Self (2 x M5 Holes) | |
| Weight | < 54g (1.9oz) | |
| Dimensions (W × L × H) | 46.8 x 110.5 x 22.5 mm (1.84” × 4.35” × 0.88”) | |
| Operation Temperature | -40°C ~ 75°C (-22°F ~167°F) | |
| Humidity | 10% to 85% RH. (non-condensing) | |
| Storage Temperature | -40°C ~ 85°C (-22°F~185°F) | |
DIMENSION
DIAGRAM
EA-POW101GT+Injector
