• 18 Port GB L2+ Management Industrial POE Switch 1

18 Port GB L2+ Management Industrial POE Switch

LW-61802GMI
Add to inquiry box
Production information
18 Port GB L2+ Management Industrial POE Switch
Download file


  • 16x 10/100/1000M PoE Ports, 2x Gigabit SFP Ports,1x Console Port
  • Support both IEEE802.3af and IEEE802.3at
  • L2+ with better performance of management, safety, QoS and others
  • With layer 2 function, including VLAN based on port, VLAN based on 802.1Q, Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, POE+ Management, IP Protection, ARP Inspection and Access Control List & etc.
  • Support advanced management through WEB, CLI, TELNET, SSH, SNMP
  • Bandwidth: 256Gbps
  • Mac address size: 8K
  • Buffer memory: 6M
  • Dual Power supply: DC 48~57V and built-in AC 100~240V 250W
 
Model No. LW-61802GMI
Fixed Port 16 x 10/100/1000Base-T PoE ports (Data/Power)
2 x 100/1000Base-X uplink SFP fiber slot ports (Data)
1 x RS232 console port(115200,N,8,1)
Ethernet Port Port 1-16 support 10/100/1000Base-T, auto-sensing, Full/half duplex MDI/MDI-X self-adaption
Network Protocol IEEE802.3 10BASE-T； IEEE802.3i 10Base-T；
IEEE802.3u 100Base-TX；
IEEE802.3ab 1000Base-T；
IEEE802.3z 1000Base-X；
IEEE802.3x
Max Power Per Port 30W, IEEE802.3af/at
Optical Fiber Port Gigabit optical fiber interface, default matching optical modules (single-mode / multi-mode, single fiber / dual fiber optical module)
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 256Gbps
Forwarding Rate 26.78Mbps@64byte
MAC 8K
Buffer Memory 6M
Jumbo Frame 9.6K
Twisted Pair Transmission 10/100/1000BASE-T ： Cat5e or later UTP(≤100 meter)
Optical Cable/ Distance Multi mode: 850nm / 0 ~ 500M
Single mode: 1310nm / 0 ~ 40KM, 1550nm / 0 ~ 120KM
Power Supply Pin Default: 1/2 (+), 3/6 (-)
Max Wattage per port/ AVG Wattage 30W/ 30W
Total PWR / Input Voltage 400W/ (AC100-240V)
Power Consumption Standby<20W, Full load<380W
Power Supply Built-in power AC 100~240V 50-60Hz 5.0A
Power Input Interface Dual input power interface design, AC power supply priority,
support anti-reverse protection, power-off automatic switching DC connection; 2 sets of DC12-48V input interface; 1-way alarm switch interface; 1 set of AC power input interface
LED Indicator Power: PWR (yellow), system: SYS (yellow); network: Link (yellow); PoE: PoE (green), Rate: Speed:(green), Fiber port : L/A (green)
Reset Switch Yes, support one key to restore factory settings
Operation TEMP / Humidity -20～+55°C；5%～90% RH (Non-condensing)
Storage TEMP / Humidity -40～+75°C；5%～95% RH (Non-condensing)
Dimension（L*W*H） 440 x 290 x 44.5mm
Net /Gross Weight ＜4.4kg / ＜5.0kg
Installation Desktop type, 19 inch 1U cabinet installation
Lightning protection / protection level Lightning protection: 6KV 8/20us; Protection level: IP30
IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV
IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV
IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m, 1s to 3s
IEC61000-4-9(pulsed magnet field):1000A/m
IEC61000-4-10(damped oscillation):30A/m  1MHz
IEC61000-4-12/18(shockwave):CM 2.5kV, DM 1kV
IEC61000-4-16(common-mode transmission):30V; 300V, 1s
FCC Part 15/CISPR22(EN55022): Class A
IEC61000-6-2(Common Industrial Standard)
Mechanical Properties IEC60068-2-6 (anti vibration)
IEC60068-2-27 (anti shock)
IEC60068-2-32 (free fall)
Certification CE / FCC
Network Management Features
Interface
 IEEE802.3X (Full-duplex)
Port temperature protection setting
Port green Ethernet Energy-saving setting
Broadcast storm control based on port speed
The speed limit of the message flow in the access port
The minimum particle size is 64Kbps
PoE Management Support PoE power supply total power limit configuration
Support PoE output power distribution for each port, turn off /af/at
Support PoE output priority configuration per port
Support PoE working status display for each port
Support power delay start
Support PoE work and time scheduling
Layer 3 Features L2+ network management, IPV4/IPV6 management
L3 soft routing forwarding,
Static route, Default route @ 128 pcs, APR @ 1024 pcs
VLAN
 4K VLAN based on port, IEEE802.1q
VLAN based on the protocol
VLAN based on MAC
Voice VLAN, QinQ configuration
Port configuration of Access, Trunk, Hybrid
Port Aggregation LACP, Static aggregation
Max 9 aggregation groups and 8 ports per group.
Spanning Tree STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
Industrial Ring Network Protocol G.8032 (ERPS), Recovery time less than 20ms
250 Ring at most, Max 1024 devices per ring
Multicast
 MLD Snooping v1/v2,Multicast VLAN
IGMP Snooping v1/v2, Max 250 multicast groups, Fast log out
Port Mirroring Bidirectional data mirroring based on port
QoS
 Flow-based Rate Limiting
Flow-based Packet Filtering
8*Output queues of each port
802.1p/DSCP priority mapping
Diff-Serv QoS, Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR)
ACL Port-based Issuing ACL,ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
Security
 IP-MAC-VLAN-Port binding
ARP inspection, Anti-DoS attack
AAA & RADIUS, MAC learning limit
Mac black holes, IP source protection
IEEE802.1X & MAC address authentication
Broadcast storm control, Backup for host datum
SSH 2.0, SSL, Port isolation, ARP message speed limit
User hierarchical management and password protection
DHCP
 DHCP Client, DHCP Snooping, DHCP Server, DHCP Relay
Management
 One-key recovery
Cable Diagnose, LLDP
Web Management (HTTPS)
NTP, System work log, Ping Test
CPU instant utilization status view
Console/AUX Modem/Telnet/SSH2.0 CLI
Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3
platform(LLDP+SNMP)
Back to the top