24 ports GE SFP+8 GE RJ45+8 10G SFP L3 Management Switch
EW-640832AGM3
Add to inquiry box
Production information
24 ports GE SFP+8 GE RJ45+8 10G SFP L3 Management Switch
FEATURES
- Hardware routing, wire-speed L3 switching packet forwarding rate up to 131Mpps
- Gigabit fiber supports long-distance transmission of up to 80 KM, which can be directly connected to the metro backbone network
- Limit the maximum number of connected ports on the port
- Support IEEE802.1x, providing port-based user authentication
- Ethernet interface for multi-way bonding, increasing bandwidth and system redundancy
- Powerful ACL function to support L2-L4 layer data filtering
- Clustering technology, supporting multiple devices to be stacked, using a unified IP address for centralized management, saving address resources
- Can be managed through various ways such as control port, web, SNMP, etc.
- Software upgrade and BootRom upgrade via TFTP
- Support DHCP server and relay function, dynamically assign IP address
- Support SFP standardized interface to effectively protect user investment
- Provide redundant power supply to increase system reliability
- Automatically detect and suppress broadcast storms, support IGMP packet detection, and effectively limit the flood of broadcast packets.
- Support flow control in full-duplex mode and half-duplex mode
- Supports Ethernet interface rate limit in 1M steps
- Advanced buffer management, support 802.1p protocol, 8 transmit queues per port map 8 priority of 802.1p
- Support IP multicast and QoS
- Support static routing
- Supports multiple dynamic routing protocols such as RIP v1/v2, OSPFv2, and BGPv4
- Support multiple multicast routing protocols such as PIM-SM and PIM-DM
SPECIFICATION
| Model | EW-640832AGM3 | |
| Backplane bandwidth | 598 Gbps | |
| Forwarding rate |
168 Mpps | |
| MAC capacity | 32K/64K | |
| Interface | 8 x gigabit RJ45 ports+ 24 x gigabit fiber ports +8 x 10G(SFP+) ports | |
| POE/POE+ | not support | |
| Dimension (W*D*H) | 442×350×44 | |
| Power supply | AC100V-240V,50Hz±10% DC:-36V~ -72V (POE models do not support DC power supply) Optional dual power supply |
|
| Environmental requirements | Operating temperature / humidity: 0 ° C -50 ° C, 10% -90% non-condensing Storage temperature / humidity: -20 ° C -70 ° C; 5% -95% non-condensing |
|
| MAC switching function | Supports static configuration and dynamic learning MAC address Support for viewing and clearing MAC addresses MAC address aging time is configurable MAC address learning limit MAC address filtering Black hole MAC entries |
|
| VLAN | 4K VLAN entries. GVRP Support 1:1 and N:1 VLAN Mapping Support basic QinQ function Support flexible QinQ function Support for Private VLAN |
|
| STP | 802.1D (STP), 802.1W (RSTP), and 802.1S (MSTP). BPDU protection, root protection, and loop protection |
|
| Multicast | IGMP v1/v2/v3 IGMP Snooping IGMP Fast Leave Multicast group policy and multicast group limit Multicast traffic cross-VLAN replication PIM-SM, PIM-DM |
|
| IPv4 | supports static routing, RIP v1/v2, OSPF, and BGP. Support policy routing Support equal cost routing for load balancing Support BFD for OSPF, BGP |
|
| IPv6 | ICMPv6, DHCPv6, ACLv6, and IPv6 Telnet. IPv6 neighbor discovery Path MTU discovery MLD v1/v2 MLD Snooping IPv6 static routing, RIPng, OSPFv3, BGP4+ Manual tunnel, ISATAP tunnel, 6 to 4 tunnel |
|
| MCE | MCE function | |
| MPLS VPN | LDP protocol MCE P/PE function requirements for MPLS VPN MPLS TE MPLS OAM |
|
| QoS | Traffic classification based on the fields of the L2/L3/L4 protocol header CAR traffic restrictions 802.1P/DSCP priority re-marking SP, WRR, SP+WRR and other queue scheduling methods Tail-Drop, WRED and other congestion avoidance mechanisms Traffic policing and traffic shaping |
|
| Security features | L2/L3/L4-based ACL flow identification and filtering security mechanism Anti-DDoS attacks, TCP SYN flood attacks, UDP flood attacks, etc. Suppression of multicast, broadcast, and unknown unicast packets. Port isolation Port security, IP+MAC+ port binding DHCP Snooping and DHCP Option 82 IEEE 802.1x authentication Radius, BDTacacs+ certification uRPF Command line hierarchical protection |
|
| Reliability | Optional support for power supply 1+1 backup Link aggregation in static/LACP mode and supports link aggregation across service cards. EAPS ring network protection VRRP GR for OSPF, BGP BFD for OSPF, BGP ISSU service without interrupting system upgrade |
|
| Management and maintenance | Console, Telnet, SSH 2.0 Browser-based WEB management SNMP v1/v2/v3 TFTP file upload and download management RMON event history Traffic statistics analysis such as sFLOW |
|
| Green energy saving | IEEE 802.3az green energy efficient Ethernet | |
