SIP Paging Gateway
SIP-GW10
Add to inquiry box
Production information
SIP Paging Gateway
FEATURE
- Built-in amplifier rated at 2x10W dual-channel output, passive loudspeakers can be connected directly for stereo audio output, no external amplifier is needed.
- SIP paging gateway for local decoding and playback, high definition stereo audio quality is guaranteed.
- Supports two programmable "press-to-talk" switch buttons, with an external speaker and microphone, it can do two-way intercom calls for emergency or consulting purposes.
- Supports G.722 wideband audio codec, provides clear and intelligible voice speech for the intercom calls. With the high audio reproduction ability and clarity, quality of communication is guaranteed.
- With SIP protocol support, the SIP-GW10 paging gateways can be easily integrated with existing third-party SIP servers. SIP paging or intercom calling using your existing phone system.
- Equipped with built-in relay switch, which can be used for door magnet control or other devices to be controlled with dry contact signal. The invoke of dry contact signal can be digital input signal from sensors, DTMF signal or call status.
- Supports processing the external sensor or other devices' digital input signal, to invoke dry contact signal output for door magnet control, automated emergency calling, automated emergency alarm, etc.
- Standard PoE (IEEE802.3at) support for fast and easy installation on a single network cable. Large-scale installation will be extremely easy and timesaving.
- With the 3.5mm audio input jack, it can collect external audio sources from devices such as mobile phones, computers, mp3, etc. and playback through the corresponding devices.
- Various peripherals can be integrated, such as IP camera, smoke sensors, infrared sensors, door magnet, and sound/ light alarm which can be used for public safety and security purposes.
SPECIFICATION
| Audio Interface | |
| Amplifier Output | 2x10W, 8Ω（4 pins） |
| Headset Output | 3.5mm Jack |
| Microphone | 3.5mm Jack |
| Other Interfaces | |
| Power Input | DC 12V-3A Jack |
| Volume Control | VOL+ and VOL-, press both to announce IP address ETH0+ETH1 |
| Ethernet | 10/100Mbps, ETH0 with PoE IEEE 802.3at enabled Support 2 call |
| Call Button | Buttons (switch button) |
| Call Button LED | Support 2 call button LED indicators |
| Digital Level Output | N/A |
| Digital Level Input | 5V Max |
| Dry Contact | NO/NC contacts, max AC 125V-1A, DC 60V-1A |
| Audio | |
| Audio Codec | G.722, G.711 A-law, G.711 U-law, Opus |
| Music Streaming | MP3 sampling rate 8 – 48KHz, bit rate 64 – 320kbps, mono or Stereo |
| Protocols | |
| Protocols | SIP(RFC3261), HT TP, TCP/IP, SSL, DNS, SNTP, NTP, RTSP, RTP, RTCP, TCP, UDP, MQT T, ICMP, DHCP, ARP, SSH |
| Administration | |
| Configuration | Web interface or auto provisioning server |
| Provision Method | MQTT IoT Protocol |
| Mechanical Properties | |
| Processor | ARM Cortex-A35 |
| RAM Storage | 128MB DDR3 |
| Environment | 128MB SLC Flash |
| Working Environment | |
| Storage Environment | -20°C ~ +50°C |
| Humidity | -40°C ~ +75°C |
| Other | 10% ~ 95% RH non-condensing |
| Others | |
| Dimension | 153 x 76 x 33mm |
| LED Indicator | PWR power indicator, SYS system indicator |
| Weight | 303g |
DIAGRAM
