• Ethernet Power Over Coaxial Slave Transmitter 1

Ethernet Power Over Coaxial Slave Transmitter

EA-EOC101PD
Add to inquiry box
Production Information
Ethernet Power Over Coaxial Slave Transmitter
Download file


  • Support Pairing function to remove crosstalk issue
  • No PC required, plug & play and reducing the cables and power distribution cost
  • Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial or UTP cable
  • Inject power over an existing coaxial or UTP cable to provide DC12V/1.5A for IP camera
  • Up to 600 meter over RG-6 and Cat5E transmission distance
  • Built-in 6KV surge protection at BNC and 4KV at RJ45 ports
  • Multi EoC/EoU transceiver/IP cameras to one transceiver at NVR side transmission
  • Kits model: 
    EA-EOC101PDK: EA-EOC101P+
    EA-EOC101PD+15-BJ101x2
MODEL EA-EOC101PD
Extender Interface
Connector Type BNC
Cable Type 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
Max. Transmission Distance 600m (2000ft.) RG6 DC56V 
Ethernet Interface
Connector Type 1x RJ-45 Connector
Cable Type Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
Rate IEEE 802.3x, Auto-Detection for 10/100Base-T and full/ half duplex
Indicators
Color LED Coaxial Data Signal Strength
Green: GOOD (Link speed > 60Mbps) / Amber: MEDIUM (Link speed 20~60Mbps)
Red: BAD (Link speed < 20Mbps) / Off: NO LINK
Push Button Reset/ Pairing
Power
Output Voltage DC12V/1.5A (MAX.) @DC Plug (EA-EOC101PD)
Power Consumption 1.5W (w/o power forwarding)
Mechanical & Environmental
Operation Temperature -20°C ~ +60°C
Humidity 20% to 85% RH. (non-condensing)
Storage Temperature -30°C ~ 80°C
Dimensions (W×D×H) 38 x 120 x 33mm
Weight 176g

CONNECTION DIAGRAM：

  • Application 1: Single Camera EoC with Power Transmission System


  • Application 2: Single Camera EoU with Power Transmission System

Back to the top