• Ethernet Power Over Coaxial Transmitter and Receiver Kit 1
  • Ethernet Power Over Coaxial Transmitter and Receiver Kit 2

Ethernet Power Over Coaxial Transmitter and Receiver Kit

EA-EOC101PT-02K
Add to inquiry box
    • Production information
    The product is divided into transmitter (EA-EOC101PT-02T) and receiver (EA-EOC101PT-02R). It is designed to work as a type of converter from RJ45 to BNC port, which supports long range power supply transmission via coaxial cable. It provides one BNC coaxial port and one RJ45 port. The product is equipped with two transmission modes which are 10/100Mbps. 
     
    Download file


    • No pairing required, plug & play and reducing the cables and power distribution cost
    • Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial
    • PoE powered and PoE over an existing coaxial to PoE IP camera
    • Supports RG6 coaxial cable: 450m@100Mbps; 1000m@10Mbps
    • Built-in 4KV surge protection at BNC and 4KV at RJ45 ports



    OPTIONAL ACCESSORIES

    15-TV119 - BNC Male to 2 BNC Female

    15-BJ101 - BNC to RJ45 Adapter

    15-BT104 - BNC to 2-Wire Adaptor

      

    15-BC104 - BNC 1 to 4 Cable

    MODEL EA-EOC101PT-02T EA-EOC101PT-02R
    Extender Interface
    Connector Type       1x BNC
    Cable Type 75-ohm RG59, RG6 cable
    Max. Transmission Distance 300m RG6 with PoE Out / 100Mbps
    450m RG6 without PoE Out / 100Mbps
    Transmission Bandwidth RG59 coaxial cable: 400m/100Mbps, 1000m/10Mbps
    Ethernet Interface
    Connector Type 1x RJ-45 with LEDs on Connector
    Cable Type Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
    Rate IEEE 802.3x, Auto-Detection for 10/100Base-T and full/half duplex
    Power
    Input Operating Voltage IEEE 802.3at (PoE+)
    Power Consumption < 2W
    LED Indicators
    LINK (GREEN) Coaxial Data Link Status
    100Mbps: On for 3 seconds, off for 1 second (Slow flashing)
    10Mbps: On for 1 second, off for 1 second (Fast flashing)
    PWR (RED) Power On
    Yellow / Green LED (On RJ45) PoE Power / Ethernet Link-Act.
    Mechanical & Environmental
    Weight 107g (3.77 oz)
    Dimensions (W × L × H) 77 x 38.3 x 22.4mm (3”x1.5”x0.88”)
    Operation Temperature -30C ~ +65°C (-22°F ~ 149°F)
    Storage Temperature -30C ~ +80°C (-22°F ~ 176°F)
    Humidity 5% to 95% RH. (non-condensing)



    OPTIONAL ACCESSORIES

    15-TV119 - BNC Male to 2 BNC Female

    15-BJ101 - BNC to RJ45 Adapter

    15-BT104 - BNC to 2-Wire Adaptor

      

    15-BC104 - BNC 1 to 4 Cable




    OPTIONAL ACCESSORIES

    15-TV119 - BNC Male to 2 BNC Female

    15-BJ101 - BNC to RJ45 Adapter

    15-BT104 - BNC to 2-Wire Adaptor

      

    15-BC104 - BNC 1 to 4 Cable

    ◆ CONNECTION DIAGRAM: 
    Notice: The distance many not match below specification due to the different cable quality, camera bandwidth and supply power noise.  



    ◆ PANEL DESCRIPTIONS:

    1. PoE OUT: PoE Output Port
    2. PoE IN: PoE Input Port
    3. LINK: BNC port Coaxial Data Link LED indicator
                 100Mbps: On for 3 seconds, off for 1 second (Slow flashing)
                 10Mbps: On for 1 second, off for 1 second (Fast flashing)
    4. PWR: Power On LED Indicator 
    5. Long Reach: Coaxial Data Port
     



    OPTIONAL ACCESSORIES

    15-TV119 - BNC Male to 2 BNC Female

    15-BJ101 - BNC to RJ45 Adapter

    15-BT104 - BNC to 2-Wire Adaptor

      

    15-BC104 - BNC 1 to 4 Cable

    Back to the top